Application of Nitrogen and Phosphorus Fertilizers in Fishponds

First, nitrogen fertilizer fish technology points and precautions

(1) Although nitrogen fertilizer has a high nitrogen content, it has a single composition and is incomplete fertilizer. Phosphorus and potassium fertilizers should be mixed. The ratio is 2:2:1. Ponds with more silt may not use potassium fertilizer. (2) Before applying nitrogen fertilizer, it is best to apply organic fertilizer as base fertilizer, and nitrogen fertilizer is suitable for top dressing. The main targets of application were filter-feeding fish such as cockroaches and cockroaches, followed by omnivorous fish such as cockroaches and cockroaches, and herbivorous fish had poor application effects. (3) The application of nitrogen fertilizer should not be mixed with quicklime, plant ash and other alkaline fertilizers. When the pH of the pool water is above 8.3, nitrogen fertilizer should also be stopped. (4) The application of nitrogen fertilizer except ammonia, the other should be dissolved in water first, then Quanchiposa, generally once a week fertilization. 100 square meters of water usage: a pond with a depth of about 1 meter, 0.75 kg each time is appropriate. Large and medium-sized reservoirs should be selected for fertilization in shallow water areas in the upstream reservoir bays and lakes, and fertilization sites should be kept as far away as possible from spillways or sluice gates to avoid loss of fertilizer and water.

二、Technical highlights and precautions for phosphorus fish farming

(1) Choose the appropriate varieties of phosphate fertilizer. The use of superphosphate is wider and the effect is better, followed by calcium magnesium phosphate fertilizer, and the effect of phosphate rock powder is poor. (2) Determine the application amount depending on the condition of the water body. The amount of fish ponds is increased by 15%, and the amount of furrows, canals, and lakes is increased by 20%. After the application, the water becomes lighter (transparency 25-30 cm), and yellow-green or brown-green is preferred. (3) Pay attention to fertilization methods. In general, it should be mixed with organic fertilizer or other nitrogen fertilizers. When mixing with nitrogen fertilizer, apply phosphate fertilizer first and apply nitrogen fertilizer later. Do not invert it so as not to cause dead fish. When applying alone, it is best to dissolve the phosphate fertilizer first and spray it on the surface of the water with a sprayer or spray it evenly. It is also possible to use a bag of phosphate fertilizer and hang it on a fixed stake in the water. (4) The casting time should be appropriate. June-September is the best season. Every day, the amount of water to be sprayed per acre is about 1 kilogram. 10 days is a cycle, and another cycle is followed by a cycle of two weeks. (5) The proportion should be reasonable. The proportion of superphosphate and urea should be 1:1, and the proportion of old fish ponds with some organic matter can be increased to 2:1. Other nitrogen fertilizers are converted into urea according to their nitrogen content, which is reasonably calculated.

BIO scope S1 is a digital handheld scope used to record digital photographs and videos.

It is mainly used in hospital, Clinic and medical departments for doctors and nurses to examine ear.

 

Advantage

 
1. Bigger LED Screen 3.5 inch with 720*480 resolution
2. Never hot lens with 300 thousand pixel
3. Disposable earmuff
4. examine external ear and middle ear

5. cerumen,otitis media, ear infections, perforation of tympanic membrane checking

6. Small & Light to hold, Easy to carry with aluminum box

7. Rechargeable Li-On battery to ensure 4 hours continuous working at least

8. Cheaper price

9. CE mark

 

Specification

 

Resolution 720X480
Light source Natural white(LED)
LCD 3.5 inches special LCD screen
Minimum color difference for different viewing angle
File format JPEG,BMP,AVI
Media Micro SD flash card
Interface 1 mini USB,1 AV-OUT,1 SD card slot
Power supply rechargeable lithium battery
External power 110V~220V AC 50/60HZ, Output DC 5V 500MA
Working time 3 hours for continuous working
Charging time 5 hours

Health & Medical

Digital Endoscope

Wuxi Biomedical Technology Co.,Ltd , https://www.wxbiomedical.com