1. After the diesel engine is decommissioned, it is necessary to conduct a thorough inspection and repair of various parts so as to keep it in good condition and then apply the lubricant. For parts of the body that are stripped of paint, paint should be re-painted to prevent rust. After checking and repairing, it should be elevated in the room and stored off the floor.
2. The motor used on the well is to be dismantled from the well after being decommissioned and placed in the room for inspection and maintenance. First wipe the dirt on the shell, and then carefully check the maintenance of the movement, and then storage. Motors and starters should be protected against dust, moisture, and rain. After packing, store it in a safe place.
3, after the use of centrifugal pumps, pumps and hoses should be withdrawn from the wells, put clean water, check the pump impeller, bearings, cups and other parts of the degree of wear and tear, wear parts of the serious to be replaced. The bearings should be cleaned with gasoline, greased with butter, and well-assembled. The rust on the iron valves of the bottom valves and elbows of the pumps should be brushed clean with a wire brush, and painted in a dry warehouse. Store off the ground.
4. After the deep well pump is deactivated, it should be started once every 7-10 days. The time is generally around 30 minutes to prevent rust in the rotating part. If the decommissioning takes a long time, the pump must be taken out of the well and put into storage after inspection.
5. After all kinds of pipes have been deactivated, they must put water in the net. Iron pipes should be painted; glue pipes should not be in contact with gasoline; plastic pipes should also be washed and placed in a dry warehouse for proper storage.
2. The motor used on the well is to be dismantled from the well after being decommissioned and placed in the room for inspection and maintenance. First wipe the dirt on the shell, and then carefully check the maintenance of the movement, and then storage. Motors and starters should be protected against dust, moisture, and rain. After packing, store it in a safe place.
3, after the use of centrifugal pumps, pumps and hoses should be withdrawn from the wells, put clean water, check the pump impeller, bearings, cups and other parts of the degree of wear and tear, wear parts of the serious to be replaced. The bearings should be cleaned with gasoline, greased with butter, and well-assembled. The rust on the iron valves of the bottom valves and elbows of the pumps should be brushed clean with a wire brush, and painted in a dry warehouse. Store off the ground.
4. After the deep well pump is deactivated, it should be started once every 7-10 days. The time is generally around 30 minutes to prevent rust in the rotating part. If the decommissioning takes a long time, the pump must be taken out of the well and put into storage after inspection.
5. After all kinds of pipes have been deactivated, they must put water in the net. Iron pipes should be painted; glue pipes should not be in contact with gasoline; plastic pipes should also be washed and placed in a dry warehouse for proper storage.
The electric wheelchair is based on the traditional Manual Wheelchair, superimposed high-performance power drive device, intelligent operating device, battery and other components, transformed and upgraded.
A new generation of intelligent wheelchairs equipped with artificially operated intelligent controllers that can drive the wheelchair to complete forward, backward, steering, standing, lying, and other functions. It is a high-tech combination of modern precision machinery, intelligent numerical control, engineering mechanics and other fields. Technology Products
power wheel chair,surgical equipment,medical equipment
Shanghai Rocatti Biotechnology Co.,Ltd , https://www.ljdmedical.com