Constant temperature water bath maintenance :
1. Clean the instrument immediately after each use.
2. After each use, the water in the constant temperature water bath is cleaned, and the coarse impurities in the constant temperature water bath are lightly brushed off with a brush, and the pot is removed. Wipe the inner and outer surfaces of the constant temperature water bath with a soft cloth, and then dry with a cleaning cloth.
3. Effect evaluation: The inner surface of the device should be free of water, and the outer surface of the device should be bright and tidy, without smudging.
4. When the constant temperature water bath is used, it must be grounded reliably, and the water should not overflow into the control box.
5. Do not use water or water level below the electric heating tube in the constant temperature water bath to prevent the electric heating tube from being damaged.
6. Perform maintenance inspection of the instrument once a month and fill in the maintenance record in time.
Constant temperature water bath application areas : Constant temperature water bath is widely used in drying, concentration, distillation, impregnation of chemical reagents, impregnated drugs and biological products, can also be used for water bath constant temperature heating and other temperature tests, is biological, genetic, viral, aquatic, environmental, medical , health, biochemical laboratory, education and scientific research essential tools stainless steel constant temperature water bath is the medical unit, colleges and universities, scientific research and environmental protection, petrochemical, printing and dyeing, factories and mines and other industries of the laboratory to do distillation, drying, concentration and constant temperature heating chemicals And the necessary tools for biopharmaceuticals. A stainless steel tubular heater is placed horizontally in a constant temperature water bath, and an aluminum shelf with a hole is placed inside the sink. The upper cover is equipped with a combination of different calibers to accommodate flasks of different calibers. There is a water discharge pipe on the left side of the constant temperature water bath. The right side of the constant temperature water bath is an electric box. The front panel of the electric box is equipped with a temperature control meter and a power switch.
Metatron Hunter 4025:
Description and Field of Application
Purpose
The Metapathia-GR Hunter software can operate only with the telemetric nonlinear analysis data processing apparatus "Metatron" and its subsequent modifications. The telemetric nonlinear analysis data processing device is compatible with the IBM-type PCs and intended for studying reaction of a biological object to different types of the informational impact. "Metatron" allows correlating the measurement process with the process affecting it and performs the following.
Operations:
1) It measures J (0) which mirrors the change of the describing parameter, and the entropic potential relative to its ini- tial value;
2) It transforms continuous signal J (0) with the preset intervals of frequencies into a histogram (a row of numerical val-ues of scanned frequencies with serial numbers from 1.8 to 8.2 Hz.);
3) It sends the current W values to PC and displays the graph on the monitor simultaneously with its impact on the examinee.
4) It accumulates the W value in its memory unit, if observing the histogram is more convenient upon completion of the measurements;
5) It issues the scale-correlated commands required for regulating the effect on the examinee at testing;
6) It transmits the W values from the unit into PC memory upon completion of the measurements and saves them in unit memory of prior to the beginning of recording data of the next measurements.
Telemetric nonlinear analysis data processing apparatus "Metatron" (hereinafter "apparatus") can be used for non-linear analysis of biological structures and testing of biologically active supplements. The apparatus can also be used in research centers and scientific research facilities.
The apparatus is intended to register psychophysics changes in system and allows to:
- Get qualitative estimation of functional condition in a form of topical analysis.
- Control effectiveness and results of different ways of treatment.
- Analyze dynamics of functional condition changes over period of time.
- Determine initial nidus of functional breach.
- Estimate character of changes using expert systems.
- Estimate basic characteristics of bio-system homeostasis.
Metatron Hunter 4025,Metapathia Gr Hunter 4025,Metatron 4025 Nls,Metatron Gr Hunter 4025
Shenzhen Guangyang Zhongkang Technology Co., Ltd. , https://www.nirlighttherapy.com