Maintenance and installation precautions for oral liquid filling machine

Oral liquid filling machine maintenance instructions

1. Because the filling machine is an automatic machine, the size of the easy-open bottle, bottle mat and cap are required to be uniform.

2. Before driving, you must first use the rocker to turn the machine to see if it is abnormal. It is true that you can drive again.

3. When adjusting the oral liquid filling machine , the tools should be used properly. It is strictly forbidden to use excessive tools or excessive force to remove the parts to avoid damage to the machine or affect the performance of the machine.

4. When the machine is adjusted, be sure to tighten the loose screws. Rotate the machine with the rocker to see if the motion meets the requirements before driving.

5. The machine must be kept clean. It is strictly forbidden to have oil, liquid or glass debris on the machine to avoid damage to the machine. Therefore, it must:

(1) The machine removes the liquid or glass debris in time during the production process.

(2) Clean all parts of the machine surface before shifting, and add clean lubricating oil to each activity department.

(3) It should be scrubbed once a week, especially in places that are not easily cleaned in normal use or blown off with compressed air.

Installation precautions for oral liquid filling machine

1. After the machine is out of the box, first check whether the random technical data is complete, and whether the machine is damaged during transportation, so as to solve it in time.

2. Install and adjust the feeding assembly and the discharging assembly according to the outline drawing in this manual.

3. Add new lubricant to each lubrication point.

4. Turn the machine with the rocker to check if the machine is running in the right direction (counterclockwise in the direction of the motor shaft). The machine must be protected from grounding.