1. Fabrication of samples: Samples were prepared in accordance with the requirements of the test standards, and their dimensions and other data were measured.
2. Power on: first turn on the software measurement and control system on the computer, then turn on the power of the pull machine. Select the appropriate test type according to the test to be performed.
3. Trial operation: Select the appropriate speed to make the tension machine run up and down to ensure that the tension machine is running normally.
4. New record: According to the number of tests to be carried out, create the corresponding number of test records; and fill in the corresponding batch number, number, test environment, sample size and other related data.
5. Loading the sample: Adjust the position of the sample on the tensile machine and install the sample.
6. Select range: According to the test force and deformation range required by the test, adjust the tension machine to the appropriate test force and deformation gear (range).
7. Clear: Zero the test force, deformation and displacement.
8. Test speed: According to the requirements of the standard test process, set the appropriate test speed; if there is no speed requirement on the standard, set the appropriate speed, the speed should not be too large, so as not to affect the test results.
9. End condition: According to the requirements of the standard test process, if the sample is to be destroyed (such as stretching, cement compression), select "breaking type judgment"; if pulling (or pressing) to a certain test force is over Select "target" and "test power";
If you are pulling (or pressing) to a certain deformation, select "Target" and "Deformation".
10. Start of the test: Click the "Test Start" button to start the test.
11. End of test: The “End of Test†button is automatically pressed after the test is completed. If you need to end the test midway, you can also manually end the test by pressing the "End of Test" button.
12. Test results: Click the “Analyze†button to view the corresponding test results. Continue the test: Click the “Test†button to return to the test operation interface. Click the “Next†button to switch the test record to the next one. Repeat steps 5-11 for the test.
Prostate Treatment Machine
Prostate Treatment Machine
Prostate Treatment Machine is the most advanced health care device of the rostate gland in the world today. This product starts the new technologic era in the health care of the prostate gland. It combines far infrared ray, electronic pulse, magnet therapy and thermotherapy to improve the whole environment of the pelvic cavity in order to increase blood circulation of overall pelvic cavity.
It allows increase blood flow into the weakened tissue for enhance ecovery and pain relief. The special care to the most important accupoint [Huiyin" of prostate gland and pelvic cavity plays a very important role in the device, this helps to improve the total conditions of the procreation system. Meanwhile, this device also has obvious effects upon female pelvic cavity. Also it can help to prevent the disease of rectum.
Health Care Device,Prostate Treatment Machine,Prostate Gland Therapy,Prostate Gland Therapy Device
Shenzhen Guangyang Zhongkang Technology Co., Ltd. , https://www.syztreatment.com
